Authentifiacation

Référence et coordonnées

Références

Hattabi

Mohamed

Professeur d’Enseignement Supérieur (PES)

Maroc

Casablanca

. Ecole Nationale Supérieure d'Electricité et de Mécanique de Casablanca


Coordonnées

Residence Andaloussia, Imm 45, Appt 7, Casablanca

0621425025

mohamedhattabi@hotmail.com

Formation supérieure

Doctorat d’Etat

Mécanique, physique

Faculté des sciences, Agdal, Rabat

2005


PhD

Mécanique des fluides, Energétique

Institut National de Polytechnique de Lorraine, Nancy, France

1995


Langue

Arabe; Anglais; Français;

Domaines de compétence
Mécanique des fluides; Turbulence; Milieu poreux; Thermique; Mise en forme des matériaux composites
Projets de recherche
Projet
Modélisation des liquid composites moulding
Mots clès
Liquid composites moulding; Modélisation; méthodes des éléments finis

Projet
Modélisation des liquid composites moulding
Mots clès
Modélisation; liquid composites moulding; taux de vide; méthode des éléments finis

Production Scientifique et technologique

Communication

#1
Benakrach Hind, Hattabi Mohamed & Echchelh Adil . MODELISATION DES BULLES DANS LES PROCEDES DE LIQUID COMPOSITE MOLDING In : 10ème Congrès Francophone de Génie des Procédés CFGP , 27-04-2016, Safi - Maroc

Article de périodique

#1
1. A. Saad, A. Echchelh, M. Hattabi & M. El Ganaoui . The permeability identification for fibrous reinforcement composite by inverse analysis. Composites: Mechanics, Computations, and Applications: An International Journal , 2016.
#2
A. Saad, A. Echchelh, M. Hattabi & M. El Ganaoui . A. Saad, A. Echchelh, M. Hattabi & M. El Ganaoui, “The identification of effective thermal conductivity for fibrous reinforcement composite by inverse method. Journal of Reinforced Plastics and Composites , 2014.
#3
M. B. NZIENGUI, H. ABDELLAOUI, J. ECHAABI & M. HATTABI . Modélisation viscoélastique des renforts fibreux dans les procédés de type Liquid Composite Molding. Revue des Composites et des Matériaux Avancés , 2014.
#4
Saad, A. Echchelh, M. Hattabi & M. El Ganaoui . A new model for the simulation and improvement of resin transfer molding process. Journal of Research on Precision Instrument and Machinery , 2013.
#5
A. Saad, A. Echchelh, M. Hattabi & M. El Ganaoui . Numerical Simulation of Thickness Variation Effect on Resin Transfer Molding Process. Polymer Composites , 2012.
#6
A. Saad, A. Echchelh, M. Hattabi & M. El Ganaoui . Optimization of the cycle time in resin transfer moulding process by numerical simulation. Journal of Reinforced Plastics and Composites , 2012.
#7
A. Saad, A. Echchelh, M. Hattabi, M. El Ganaoui & F. Lahlou . Numerical Simulation and Analysis of Flow in Resin Transfer Molding process. Fluid Dynamics & Materials Processing , 2012.
#8
J. Samir, J. Echaabi & M. Hattabi . Chapter 1 : Control Volume Finite Element Methods for Flow in Porous Media: Resin Transfer Molding. Livre : Finite Element Analysis – Applications in Mechanical Engineering, , Publisher: InTech, Chapters published , 2012.
#9
J. Samir, J. Echaabi & M. Hattabi . Numerical Algorithm and Adaptive Meshing for Simulation the Effect of Variation Thickness in Resin Transfer Molding Process. Composites Part B: Engineering , 2011.
#10
A. Saad, A. Echchelh, M. Hattabi, M. El Ganaoui . improved approach to simulating resin transfer moulding. SPE Plastics research online , 2011.
#11
A. Saad, A. Echchelh, M. Hattabi, M. El Ganaoui . Modélisation et contribution des procédés des procédés RTM . Revue des Composites et des Matériaux Avancés , 2011.
#12
A. Saad, A. Echchelh, M. Hattabi, M. El Ganaoui . An improved computational method for non isothermal resin transfer moulding simulation. Journal of thermal science , 2011.
#13
A. Saad, A. Echchelh, M. Hattabi, M. El Ganaoui . A fast computational model to the simulation of non-isothermal mould filling process in resin transfer moulding. Polymer Composites , 2011.
#14
A Saad, A. Echchelh, M. Hattabi, M. El Ganaoui . Improvement of a flow tracking method applied to resin transfer moulding simulation. Phys & Chem. News , 2011.
#15
J. Samir, J. Echaabi&M. Hattabi . Application of Control Volume / Finite Element Method and adaptive Meshing for Simulation the Effect of Variation Thickness in Resin Transfer Molding Process. Journal of Porous Media , 2011.
#16
E. H. Irhirane, J. Echaabi, M. Abousaleh, M. Hattabi & A. Saouab . Modeling and simulation of the rupture and the rigidity degradation of a graphite epoxy in three points bending test. ASME, Journal of Engineering Materials and Technology , 2010.
#17
J. Samir, J. Echaabi & M. Hattabi . Modélisation et Application d’un maillage adaptatif pour la simulation de l’effet de variation de l’épaisseur dans les procédés RTM . Revue des Composites et des Matériaux Avancés , 2009.
#18
E. H. Irhirane, J. Echaabi, M. Abousaleh, M. Hattabi & F. Trochu . Matrix and fibre stiffness degradation of a quasi-isotrope graphite epoxy laminate under flexural bending test. Journal of Reinforced Plastics and Composites , 2009.
#19
Echaabi, M. B. Nziengui & M. Hattabi . Compressibility and relaxation models for fibrous reinforcements in Liquid Composites Moulding. International Journal of Material Forming , 2008.
#20
Hattabi M., Bensalah M.O. & Echaabi J. . Numerical and Experimental Analysis of the Resin Transfer Molding Process. Korea-Australia Rheology Journal , 2008.
#21
E. H. Irhirane, J. Echaabi, M. Abousaleh, M. Hattabi & A. Saouab . Critères de rupture appliqués aux matériaux composites. International Journal for Simulation and Multidiscipllinary Design Optimization , 2008.
#22
Hattabi M., Echaabi J., Bensalah M.O, J. Bréard & A. Saouab . Flow Analysis during On-line and Radial Injection Applications in Permeability Measurements. Journal of Reinforced Plastics and Composites , 2005.
#23
Hattabi M., Snake I., Echaabi J. & Bensalah M.O . Flow front simulation in the liquid composite molding processes . Comptes Rendus de Mécanique , 2005.